Electric Chimney Fan, Chimney Induced Fan, Fireplace Fan Flue Chimney Exhaust Fan, Chimney Smoke Fan 100W Induced Draft Fan

Product descriptionMotor life is longer, efficient core power, quiet work makes home life more comfortable.Less noise, low friction, high speed, less heat, and greater suction.This model is anti-freeze, anti-frost, anti-high temperature, anti-corrosion, anti-rust, and durable.Wind Ambassador fuels full burn/Fast temperature rise, energy saving/Good wind effect. Specification:Weight: 3kgVoltage: 110V (USA), 220V (Europe)Power: 120WApplicable caliber: 25cmColor: image colorPackage: 1 * induced draw fanPlease Note:1. Turn off the power switch when installing or removing to avoid electric shock.2. The interface to the smoke outlet must be fastened with waterproof insulating tape.3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect.4. If the induced draft fan stops working, attention should be paid to the backflow of smoke through which smoke escapes.5. The smoke outlet is placed on the chimney. The smoke outlet must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the fireplace cannot burn the insulation layer of the power cord.

• Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. During installation or removal, disconnect the power supply to prevent electric shock.
• Siamese large fan blades, Strong wind, strong and durable, strong wind. Let you feel the new wind experience.
• The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
• 120W body thickened, Introduce the wind freely, do not pour smoke, say goodbye to oily smoke.
• The temperature at the chimney outlet cannot exceed 60 degrees, and the distance from the fire source to the chimney outlet is required to be more than 6 meters. Otherwise, the induced draft fan will be burned. Install the power cord with at least 0.5 square copper wire.